Patterning oxide nanopillars at the atomic scale by phase transformation

Researchers at Tohoku University’s Advanced Institute for Materials Research (AIMR) have carried out a collaborative study aimed at precisely controlling phase transformations with high spatial precision, which represents a significant step forward in realizing new functionalities in confined dimensions.

The team, led by Prof. Yuichi Ikuhara, applied the focused electron beam of a scanning transmission electron microscope (STEM) to irradiate SrNbO3.4 crystals, and demonstrated a precise control of a phase transformation from layered SrNbO3.4 to perovskite SrNbO3 at the atomic scale.

Such a precise control of phase transformations opens up new avenues for materials design and processing, as well as advanced nanodevice fabrication. Full results of the study have been published in Nano Letters.

Phase transformations in crystalline materials are of primary fundamental interest and practical significance in a wide range of fields, including materials science, information storage and geological science. To date, it remains highly desirable to precisely tailor the phase transformations in a material due to their potential impact on macroscopic properties and thus many advanced applications.

Despite decades of efforts, precisely controlling phase transformations at the atomic scale still poses a significant challenge due to the intricacies of governing thermodynamic conditions with atomic precision. Recent technical advances in aberration-corrected STEM offer fertile new ground for probing samples by a focused sub-Angström electron beam, opening an avenue for precisely triggering phase transformations.

This work has demonstrated a successful control of a phase transformation from the layered SrNbO3.4 to the perovskite SrNbO3 with atomic precision by manipulating a focused sub-Angström electron beam to any selectable region.

Such a concept — of a precise control of phase transformations with an atomic spatial precision — should be, in principle, applicable not only to SrNbO3.4/SrNbO3 but also to other materials, finding applications in material processing and nanodevice fabrication.

Key points :

  • Precisely controlling phase transformation with high spatial precision
  • Patterning oxide nanopillars at the atomic scale by phase transformation

Story Source:

The above post is reprinted from materials provided by Tohoku University.Note: Materials may be edited for content and length.


Journal Reference:

  1. Chunlin Chen, Zhongchang Wang, Frank Lichtenberg, Yuichi Ikuhara, Johannes Georg Bednorz. Patterning Oxide Nanopillars at the Atomic Scale by Phase Transformation. Nano Letters, 2015; 15 (10): 6469 DOI:10.1021/acs.nanolett.5b01847

Tohoku University. (2015, October 15). Patterning oxide nanopillars at the atomic scale by phase transformation. ScienceDaily. Retrieved October 23, 2015 from www.sciencedaily.com/releases/2015/10/151015120027.htm

Posted by Ahmad Aya Sanusi   @   23 October 2015

Related Posts

Like this post? Share it!

RSS Digg Twitter StumbleUpon Delicious Technorati

0 Comments

No comments yet. Be the first to leave a comment !
Leave a Comment

Name

Email

Website

Previous Post
«
Next Post
»