Plasmonics: Model makes light work of nanocircuits

As computer manufacturers cram ever more processing power onto tiny chips, they face a growing problem. The connections between electronic components that measure just a few billionths of a meter across allow electrons to leak, which reduces the quality of the signal they carry, wastes energy and causes devices to overheat.

One promising solution is to replace those electrons with photons of light. Hong-Son Chu and Er-Ping Li of the A*STAR Institute of High Performance Computing in Singapore and co-workers have now developed a numerical model to simulate the performance of circuits that rely on light, which could be an invaluable tool for designers in the burgeoning field of nanophotonics.

Devices that manipulate photons of light are typically many times larger than conventional circuit components, and this limits their use. In contrast, “plasmonic technology promises to overcome the size mismatch between microscale photonics and nanoscale electronics,” says Li.

When light hits the interface between a metal and a dielectric insulator, it creates ripples in the density of the electric charge. These ripples, known as plasmons, are bound to the electromagnetic field of the incoming light, and travel along the interface. The plasmons have a shorter wavelength than the light, so the components that guide and manipulate them can be smaller than those used to control light directly. “This emergent technology is a potential platform for the next generation of optical interconnects that enables the deployment of small-footprint and low-energy integrated circuitry,” says Chu.

Microelectronics researchers have previously relied on time-consuming and expensive computer simulations to fine-tune the designs of their plasmonic nanocircuits. Li’s team has developed a much simpler model that includes a library of different plasmonic components such as waveguides, modulators and photodetectors, and can integrate their properties to predict how the whole system will behave.

Li and his co-workers used their model to quickly design and improve a compact Mach-Zehnder plasmonic modulator, a commonly used component that enables an electrical signal to control a beam of light. The device relies on an electro-optic material whose refractive index changes when a voltage is applied.

The simulation showed how the size and shape of the device could be optimized to lower its operating voltage, as well as increasing the difference between its two switching states to reduce signal noise.

The researchers now plan to improve their design software so that it includes many more properties of nanocircuits, “including mechanical, thermal, optical and electrical characteristics,” says Chu.


Story Source:

The above post is reprinted from materials provided by The Agency for Science, Technology and Research (A*STAR). Note: Materials may be edited for content and length.


Journal Reference:

  1. Hong-Son Chu, Oka Kurniawan, Wenzu Zhang, Dongying Li, Er-Ping Li.Integrated System-Level Electronic Design Automation (EDA) for Designing Plasmonic Nanocircuits. IEEE Transactions on Nanotechnology, 2012; 11 (4): 731 DOI: 10.1109/TNANO.2012.2194507

 


The Agency for Science, Technology and Research (A*STAR). (2013, March 13). Plasmonics: Model makes light work of nanocircuits. ScienceDaily. Retrieved October 12, 2015 from www.sciencedaily.com/releases/2013/03/130313111703.htm

Posted by Ahmad Aya Sanusi   @   12 October 2015

Related Posts

Like this post? Share it!

RSS Digg Twitter StumbleUpon Delicious Technorati

0 Comments

No comments yet. Be the first to leave a comment !
Leave a Comment

Name

Email

Website

Previous Post
«
Next Post
»