Nanoscience

To facilitate faster energy conversion in these cells, scientists disperse nanoparticles made from special metals called ‘noble’ metals, for example gold, silver and platinum along the surface of an electrode. These metals are not as chemically responsive as other metals at the macroscale but their atoms become more responsive at the nanoscale. Nanoparticles made from these metals act as a catalyst, enhancing the rate of the necessary chemical reaction that liberates electrons from the fuel. While the nanoparticles are being sputtered onto the electrode they squash together like putty, forming larger clusters. This compacting tendency, called sintering, reduces the overall surface area available to molecules of the fuel to interact with the catalytic nanoparticles, thus preventing them from realizing their full potential in these fuel cells.

Research by the Nanoparticles by Design Unit at the Okinawa Institute of Science and Technology Graduate University (OIST), in collaboration with the SLAC National Laboratory in the USA and the Austrian Centre for Electron Microscopy and Nanoanalysis, has developed a way to prevent noble metal nanoparticles from compacting, by encapsulating them individually inside a porous shell made of a metal oxide. The OIST researchers published their findings in Nanoscale. Their work has immediate applications in the field of nano-catalysis for the manufacturing of more efficient fuel cells.

The OIST researchers designed a novel system. They encapsulated Palladium nanoparticles in a shell of Magnesium oxide. Then they dispersed this core-shell combination on an electrode and measured the immersed electrode’s abilities in improving the rate of the electrochemical reaction that occurs in methanol fuel cells. They demonstrated that encapsulated Palladium nanoparticles give a significantly superior performance than bare Palladium nanoparticles.

The OIST researchers had previously realized that Magnesium oxide nanoparticles could form porous shells around noble metal nanoparticles while studying Magnesium and Palladium nanoparticles separately. The porosity of this added armor ensures it does not screen molecules of the fuel from reaching the encapsulated Palladium. Electron microscopy images confirmed that the Magnesium oxide shell simply acts as a spacer between the Palladium cores as they try to stick to each other, letting each to realize its full reactive potential.

The advanced nanoparticle deposition system at OIST allowed the researchers to fine tune the experimental parameters and vary the thickness of the encapsulating shell as well as the number of Palladium nanoparticles in the core with relative ease. Tuning sizes and structures of nanoparticles alters their physical and chemical properties for different applications.

“More core-shell combinations can be tried using our technique, with metals cheaper than Palladium for instance, like Nickel or Iron. Our results show enough promise to continue in this new direction,” said Vidyadhar Singh, the paper’s first author, and postdoctoral fellow under the supervision of Prof. Mukhles Sowwan, the director of OIST’s Nanoparticles by Design Unit, who was also a corresponding author of the paper.

Story Source:

The above post is reprinted from materials provided by Okinawa Institute of Science and Technology – OIST. The original item was written by Joykrit Mitra. Note: Materials may be edited for content and length.

Journal Reference:

1. Vidyadhar Singh, Cathal Cassidy, Frank Abild-Pedersen, Jeong-Hwan Kim, Kengo Aranishi, Sushant Kumar, Chhagan Lal, Christian Gspan, Werner Grogger, Mukhles Sowwan. Engineering high-performance Pd core–MgO porous shell nanocatalysts via heterogeneous gas-phase synthesis. Nanoscale, 2015; 7 (32): 13387 DOI: 10.1039/C5NR02663F

Okinawa Institute of Science and Technology – OIST. (2015, August 7). Pouring fire on fuels at the nanoscale. ScienceDaily. Retrieved October 13, 2015 from www.sciencedaily.com/releases/2015/08/150807092551.htm